Areas served
Exterior finishing in Abbotsford, BC
Moonrise’s home city, and where most of the work is.
What we do in AbbotsfordLocal context
In Abbotsford
Abbotsford is home for Moonrise. We have been based here since 2007, and most of the homes we finish are within a short drive, from the older streets around the historic downtown and Mill Lake to the newer custom builds climbing Eagle Mountain, Auguston and Sandy Hill. Being local matters on an exterior: we know the neighbourhoods, the inspectors, and how a wall has to be built to survive a Fraser Valley winter.
For an exterior finisher, the city is really two markets. There are the new custom homes going up on the hillsides and on acreage, where the exterior is part of an architect’s design and every reveal and material transition has to be detailed to match. And there are the thousands of homes built from the 1980s through the 2000s whose original cladding is now reaching the end of its life and starting to let moisture in, the re-clad work that makes up a steady share of what Moonrise does here.
Abbotsford also sits in one of the wettest populated corners of Canada. The Fraser Valley pushes sustained, wind-driven rain against west- and south-facing walls for months at a time, and the failure point on most older homes is water getting behind the cladding. Everything Moonrise installs in Abbotsford is built around that reality, a proper rainscreen gap, flashing at every transition, and ventilation so the wall drains and dries instead of trapping moisture.
What we do here
Services in Abbotsford
In Abbotsford, Moonrise works across the full range of the exterior. James Hardie and fiber-cement siding for durable, low-maintenance field walls; real western red cedar siding, soffits and feature walls for the warmth a custom home wants; and the complete envelope, cladding, soffits, fascia, trim and flashing, finished by one crew so the details line up rather than being handed between trades.
The work splits fairly evenly between homeowners and builders. Homeowners come for new-build exteriors, additions and full re-clads; custom-home builders and general contractors hand Moonrise the whole envelope as a subcontractor, so they have one accountable crew for the exterior and one less interface to manage. Both get the same Abbotsford-based, scheduled and supervised crews.
Local knowledge
Good to know in Abbotsford
Why re-clads are so common in Abbotsford
A large share of Abbotsford’s housing was built from the 1980s through the 2000s, and that original cladding is now at the end of its service life. Combined with the Fraser Valley’s heavy rain, that means moisture tracking behind the siding and into the sheathing. A re-clad with a proper rainscreen rebuilds the wall so it drains and dries, which is why it is such a steady part of the work here.
What the Fraser Valley climate asks of a wall
Sustained rain, wind-driven moisture and the occasional freeze-thaw cycle are hard on an exterior. The answer is not just the cladding, it is the rainscreen gap behind it, the flashing at every window, transition and base course, and the ventilation that lets the assembly dry. Get those right and the exterior lasts decades; skip them and even good siding fails early.
Cedar upkeep in this climate
Real cedar rewards an Abbotsford home with warmth, but it asks for maintenance, a clean and a fresh coat of stain or oil roughly every three to five years, sooner on exposed south and west walls. Moonrise is upfront about that before any cedar goes on, and will often pair cedar accents at eye level with a lower-maintenance cladding on the high, hard-to-reach walls.
Permits and the City of Abbotsford
Purely cosmetic exterior work often does not need a permit, but a re-clad that touches the wall assembly, or any structural change, usually does. Moonrise builds to the BC Building Code and to James Hardie’s published specifications, and can help homeowners understand what the City of Abbotsford will want for a given scope before the work starts.
Good to know
Abbotsford questions.
Is Moonrise actually based in Abbotsford?+
Yes, Abbotsford is Moonrise’s home city, and has been since 2007. Most of the homes we finish are right here in town and on the surrounding hillsides, which is part of why we can keep scheduled, supervised crews on local jobs rather than spreading thin.
Why do so many Abbotsford homes need a re-clad?+
A lot of Abbotsford’s housing was built between the 1980s and 2000s, and that original cladding is now reaching the end of its life. Add the Fraser Valley’s heavy, sustained rain and you get moisture behind the siding, and a steady demand for full re-clads done properly.
What siding holds up best to Abbotsford’s rain?+
For most walls, fiber-cement (James Hardie) installed over a proper rainscreen is the most durable, low-maintenance choice in this climate. Real cedar is beautiful for accents and custom homes but needs more upkeep. Either way, the install, rainscreen, flashing, ventilation, matters more than the product itself.
Do you work with Abbotsford custom-home builders?+
Yes. A large part of the Abbotsford work is as the exterior-finishing subcontractor for local custom-home builders and general contractors, taking the whole envelope so the builder has one accountable crew for siding, soffits, stone and trim, and a predictable schedule.
Do you serve the rest of the Fraser Valley too?+
Moonrise is Abbotsford-based but finishes exteriors across the Fraser Valley, including Mission, Chilliwack, Langley, Surrey and Maple Ridge, for both homeowners and builders. Abbotsford is simply where most of the work is, given our roots here.